---
title: "Selecting screw lengths for bigHead collar fasteners"
id: "9365"
type: "guides"
slug: "selecting-screw-lengths-for-bighead-collar-fasteners"
published_at: "2026-05-11T09:05:56+00:00"
modified_at: "2026-05-15T11:14:59+00:00"
url: "https://bighead.co.uk/the-techub/guides/selecting-screw-lengths-for-bighead-collar-fasteners/"
markdown_url: "https://bighead.co.uk/the-techub/guides/selecting-screw-lengths-for-bighead-collar-fasteners.md"
excerpt: "A practical guide to selecting screw lengths for bigHead F2/SF2 collars, with Le calculations, stack checks and rules for blind, sighted and closed designs."
taxonomy_guide_category:
  - "Design and selection guides"
  - "Selection"
---

[javascript:void(0)](javascript:void(0))

[javascript:void(0)](javascript:void(0))
![bigHead white logo](https://bighead.co.uk/wp-content/themes/bighead_wordpress_theme/images/bighead-logo.svg)- [Home](https://bighead.co.uk/)
- [Products](https://bighead.co.uk/bighead-products/)
- [Bespoke](https://bighead.co.uk/bespoke/)
- [Guidance](https://bighead.co.uk/guidance/)
- [tecHub](https://bighead.co.uk/the-techub/)
- [About bigHead](https://bighead.co.uk/about-bighead/)
- [Contact](https://bighead.co.uk/get-in-touch/)

 [Home](https://bighead.co.uk/)
 › [tecHub](https://bighead.co.uk/the-techub/)
 › [Guides](https://bighead.co.uk/the-techub/guides/)
 › Selecting screw lengths for bigHead…

![Image](https://bighead.co.uk/wp-content/uploads/2026/05/screw_lengths_coloured.jpg)

Design and selection guides

Selection

# Selecting screw lengths for bigHead collar fasteners

[Back to guides](../)

This guide explains how to select screw lengths for bigHead internally threaded collar fasteners (F2/SF2), including thread engagement and installation stack considerations.

Selecting the correct screw length for collar products is about balancing two factors: usable internal thread length (Le) and installation stack thickness.

Follow the steps in this guide to determine the acceptable screw length range for your application.

## Key takeaways

- Always calculate usable thread length (Le) before selecting a screw. Le varies by collar type and thread size.
- Blind collars require screw tip clearance (Lu) to avoid deformation from screw-to-end contact.
- Closed blind and closed sighted collars include an unthreaded bore, reducing Le more than standard products.
- Sighted collars allow full pass-through, but minimum engagement and clearance space beyond the collar must be checked.
- Installation stack thickness matters. Section, adhesive, washers, and flange thicknesses all reduce available screw engagement.
- Do not exceed the maximum allowable thread length in blind configurations – this is the most common cause of installation failures.
- Undersized screw lengths risk incomplete engagement, reducing mechanical performance and installation reliability.
- When in doubt, calculate using the simple sequence: Le → + stack thickness → compare screw length against min/max limits.

## 1. Confirm the collar type

---

First, confirm whether the collar is:

- Blind
- Sighted
- Closed blind, or
- Closed sighted

Each configuration changes the usable thread length calculation.

Your goal is to choose a screw that fully engages the available internal thread without bottoming out (blind collars) or without over-protrusion (sighted collars).

## 2. Calculate usable thread length (Le)

---

Usable thread length (Le) is the amount of internal thread available for screw engagement.

Use the correct formula based on the collar type.

### Blind collars

For blind collars (standard F2/SF2 products with blind Heads), internal threads run the full collar length (L).

A tip clearance (Lu) is required to avoid screw-to-end contact, which could deform or fail the bigHead.

#### Recommended screw tip clearances (Lu):

- M4: 1.4 mm
- M5: 1.6 mm
- M6: 2 mm
- M8: 2.5 mm
- M10: 3 mm
- M12: 3.5 mm

#### Usable thread length:

*Le = L – Lu*

This is the maximum screw thread that may enter the collar during installation.

![Diagram illustrating two types of screw entry scenarios for a blind collar bigHead fastener. It highlights excessive screw entry with a cross symbol and deformation of the bigHead, and correct screw tip clearance with labelled dimensions Le, Lu, and L, accompanied by a checkmark.](https://bighead.co.uk/wp-content/uploads/2026/05/Screw_lgth_blind_collar.jpg)

Screw length implications for blind collar bigHead fasteners

### Sighted collars

Sighted collars (standard F2/SF2 products with sighted Heads) allow the screw to pass completely through.

Two constraints apply:

- Minimum thread engagement: the screw should engage the full collar thread length.
- Pass-through clearance: any portion of the screw protruding beyond the collar must not interfere with the surrounding assembly.

When fastening from the Head side, include 1.2 mm of material thickness in the required screw length.

#### Minimum screw thread length:

*L + installation stack + 1.2 mm (Head-side material)*

![Diagram illustrating two types of screw entry scenarios for a sighted collar bigHead fastener. It highlights incomplete screw engagement with a cross symbol and indicates the need to check screw pass-through clearance with an attention symbol.](https://bighead.co.uk/wp-content/uploads/2026/05/Screw_lgth_sighted_collar.jpg)

Screw length implications for sighted collar bigHead fasteners

### Closed blind or closed sighted collars

Closed blind and closed sighted collar customisations include:

- A closed end wall thickness
- A fixed unthreaded bore section

Both reduce usable thread length.

#### Unthreaded bore length (Lu):

- M4–M8 → 5 mm
- M10 → 6 mm
- M12 → 7 mm

#### Usable thread length:

*Le = L – Lu*

The selected screw must not exceed this amount of engagement when tightened.

![Diagram illustrating two types of screw entry scenarios for a closed blind collar customised bigHead fastener. It indicates the usable thread limitation (Lu) with an attention symbol, and highlights the risk of assembly gaps with excessive screw lengths using a cross symbol.](https://bighead.co.uk/wp-content/uploads/2026/05/Screw_lgth_closed_blind.jpg)

Screw length implications for closed blind collar customised bigHead fasteners

![Diagram illustrating two types of screw entry scenarios for a closed sighted collar customised bigHead fastener. It indicates the usable thread limitation (Lu) with an attention symbol, and highlights the risk of assembly gaps with excessive screw lengths using a cross symbol.](https://bighead.co.uk/wp-content/uploads/2026/05/Screw_lgth_closed_sighted.jpg)

Screw length implications for closed sighted collar customised bigHead fasteners

## 3. Calculate installation stack thickness

---

Consider the full assembly stack-up. Add every physical layer the screw must pass through before engaging the collar. For example:

- Section thickness
- Adhesive layer (if surface bonded)
- Washers
- Flange thickness
- Head‑side material allowance, if applicable (see step 2)

## 4. Combine Le and stack thickness to identify screw length range

---

### Blind collars

To avoid bottoming out, the screw must not exceed: *Le + installation stack.*

### Sighted collars

The screw must:

- Meet or exceed the minimum engagement requirement: *L + installation stack + 1.2 mm* (if fastening from the Head side).
- Not protrude excessively beyond the collar.

## Examples

---

These examples show how to calculate suitable screw lengths for common fastening scenarios.

Example 1: blind collar, surface bonded, standoff application

- Product: F2 B20 M6 × 20
- Configuration: surface bonded, standoff
- Fastens: 5 mm section + washer (1.6 mm)

**Usable thread length:**

- Lu (M6) = 2 mm
- Le = 20 – 2 = 18 mm

**Installation stack:**

- 5.0 + 1.6 = 6.6 mm

**Maximum allowable screw thread length:**

- 18 + 6.6 = 24.6 mm

**Guidance:**

- ≤24 mm → OK
- ≥25 mm → too long: risk of bottoming out

![Diagram showing a cross-sectional view of a blind surface bonded bigHead collar installation with labelled assembly stack items including washer and fastened material. It illustrates the relationship between collar length (L), and screw length with a check mark indicating adequate screw tip clearance (Lu).](https://bighead.co.uk/wp-content/uploads/2026/05/Screw_lgth_ex_01.jpg)

Example 2: sighted collar, surface bonded, front-face installation

- Product: SF2 S30 M8 × 15
- Configuration: surface bonded, socket
- Fastens: 3 mm section (flanged screw, no washer)
- Front-face installation adds: 1.2 mm Head thickness

**Required thread engagement:**

- 15 mm collar length

**Minimum screw length:**

- 15 + 3 + 1.2 = 19.2 mm

**Guidance:**

- ≥20 mm → OK (check for excess protrusion)
- ≤19 mm → incomplete engagement (not recommended)

![Diagram showing a cross-sectional view of a socket surface bonded bigHead collar installation with labelled assembly stack items including the fastened material and the Head thickness (T). It illustrates the relationship between collar length (L), and flange screw length with a check mark indicating adequate pass-through.](https://bighead.co.uk/wp-content/uploads/2026/05/Screw_lgth_ex_02.jpg)

Example 3: closed blind collar, embedded, flush installation

- Product: F2 S23 M5 × 10 BCL (customised)
- Configuration: embedded, flush
- Fastens: 2.5 mm section + 1 mm washer

**Usable thread length:**

- Lu (M5 closed blind) = 5 mm
- Le = 10 – 5 = 5 mm

**Installation stack:**

- 2.5 + 1.0 = 3.5 mm

**Maximum allowable screw thread length:**

- 5 + 3.5 = 8.5 mm

**Guidance:**

- ≤8 mm → OK
- ≥9 mm → too long: do not use

![Diagram showing a cross-sectional view of a socket embedded bigHead closed-blind collar installation with labelled assembly stack items including washer and the fastened material. It illustrates the relationship between collar length (L), and screw length with a check mark indicating adequate screw tip clearance (Lu).](https://bighead.co.uk/wp-content/uploads/2026/05/Screw_lgth_ex_03.jpg)

Example 4: closed sighted collar, rear-face installation

- Product: SF2 S38A M10 × 20 CL (customised)
- Configuration: Surface bonded, socket
- Fastens: 9 mm section (flanged screw, no washer)
- Rear-face installation adds: 1.2 mm Head thickness
- Adhesive bondline adds: 1 mm thickness

**Usable thread length:**

- Lu (M10 closed sighted) = 6 mm
- Le = 20 – 6 = 14 mm

**Installation stack:**

- 9 mm

**Maximum allowable screw thread length:**

- 14 + 9 + 1.2 + 1 = 25.2 mm

**Guidance:**

- ≤25 mm → OK
- ≥26 mm → too long: do not use

![Diagram showing a cross-sectional view of a reverse socket surface bonded bigHead collar installation with labelled assembly stack items including the fastened material, the substrate, the adhesive bondline, and the Head thickness (T). It illustrates the relationship between collar length (L), and flange screw length with a check mark indicating adequate screw tip clearance.](https://bighead.co.uk/wp-content/uploads/2026/05/Screw_lgth_ex_04.jpg)

# Get support

If you’re unsure about screw selection, thread engagement, or installation stack calculations, we can help you review your application and identify suitable options.

[Get in touch](#contact-form)

## FAQs

- What happens if the screw is too long in a blind collar? The screw will bottom out against the closed end, deforming or damaging the bigHead. This is considered misuse and may result in product failure.
- How do I know if my screw is long enough for a sighted collar? Ensure the screw length meets or exceeds the required minimum engagement:*L + installation stack + 1.2 mm (if fastening from the Head side).* The examples in this guide show how to calculate it.
- Why is tip clearance (Lu) different for each thread size? The clearance allowance scales with thread diameter and pitch to maintain sufficient deformation protection. Larger threads require greater tip clearance.
- Do washers or flanged screws affect screw length selection? Yes. Any component between the screw head and the collar adds to the installation stack thickness and must be included in the calculation.
- My application requires a specific engagement length. Can I request a custom collar design? Yes. bigHead offers [custom collar](https://bighead.co.uk/bespoke/customise/) options – including closed, sighted, length variant, and hybrid options. We can help you choose the optimal collar customisation for your application.

# Can’t see what you’re looking for?

[Get in touch](#contact-form)

- [Overview](https://bighead.co.uk/the-techub/)
- [Guides](https://bighead.co.uk/the-techub/guides/)
- [Specifications](https://bighead.co.uk/the-techub/specifications/)
- [Case studies](https://bighead.co.uk/the-techub/case-studies/)
- [FAQs](https://bighead.co.uk/the-techub/faqs/)

This site uses cookies to improve your experience. [Read More](https://bighead.co.uk/privacy-policy/)
 Accept

Privacy & Cookies Policy

Close #### Privacy Overview

This website uses cookies to improve your experience while you navigate through the website. Out of these, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience.

NecessaryNecessary

Always Enabled

Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.

Non-necessaryNon-necessary

Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.

SAVE & ACCEPT